FAQs

SaveKey PREMIUM series

SaveKey PREMIUM switch system – a wireless system which does not require special electrical installation.

SaveKey PREMIUM series is the newest solution offered by the producer.

This series uses another communication method. SaveKey PREMIUM touch panels communicate wirelessly over the ZigBee standard or using RS-485 BUS protocol. The users of SaveKey PREMIUM series can control the whole building with one device, create lighting scenes and control everything remotely from any place in the world (abiLine smartControl).

SaveKey PREMIUM series does not require special electrical installation as in case of SaveKey ADVANCED series.

Additionally, the user who has SaveKey ADVANCED devices installed in his building can expand the existing system without modifying electrical installation.

If you wish to install another switch you can add SaveKey PREMIUM switch which will communicate with the remaining ones and will not change the functionality of the system.

You can use 4 gangs at maximum load 4A per gang. One scene can control up to 250 lights.

SaveKey ADVANCED series

SaveKey ADVANCED switch system – a system for the new electrical installation.

You are building or repairing a flat, house or office, you are installing the wiring or you can still change it.

Moreover, you are keen on intelligent solutions and would like to control the devices remotely, set temperature or turn on chosen lights while sitting comfortably on the sofa. If yes, ADVANCED system is perfect for you.

SaveKey ADVANCED switch system enables lighting, air-conditioning and curtain control.

Products from ADVANCED series:

  • Light touch panel switches
  •  Curtain touch panel switches
  •  Thermostats

The system can be expanded by using SaveKey gateway.

There are no limitations, you can control all appliances with one switch.

SaveKey ADVANCED switches are operated by a SaveKey ADVANCED remote controller, mobile phone app or gestures.

 

Each panel requires only power supply (L and N) and parallel connection using twisted pair cabling. Then you connect the panel and lights to power supply.

The panels in this series can be programmed, switches and scenes can be set individually. You can program the switch with a remote controller. You should only give us the film type in the order.

Assembly and Setting Instructions are HERE.

Of course, you can change the icons and names on the switch screen.

If you want to customize your switch, send us the details and our graphic designer will create a project for you.

At the moment we are working on creating the app in which you can customize the switch panel by yourself. It will take a while, in the meantime send us an email: biuro@abiline.pl

Yes, you can set up to 6 scenes on one switch.

In order to buy the switches go to our online shop www.abiline.pl

Please read the Assembly and Setting Instruction: Seria3000_PL_ver3.0

SaveKey BASIC series

SaveKey BASIC switch system – the system which does not require changing the existing electrical installation.

You like interesting solutions and new technological trends, but you do not want any significant changes and repairs in your flat, house or office. If that is about you, BASIC series will be perfect for you.

SaveKey BASIC switch system enables lighting, air-conditioning and curtain control.

Products from BASIC series:

  • Light touch panel switches
  • Curtain touch panel switches
  • Thermostats

As there is no communication between the switches in this series, you can control the switch only in a given room. You cannot control all switches from one device or control the switches remotely from any place.

SaveKey BASIC switches are operated by a SaveKey BASIC remote controller.

Remove a traditional light switch and replace it with a SaveKey touch panel switch. Each switch requires only power supply (L and N).

Then you connect the panel and lights to power supply.

Assembly and Setting Instructions are HERE.

You can use 4 gangs at maximum load 4A per gang.

SaveKey BASIC switches of higher maximum load are marked with letter “H”.

Dimmers with higher maximum load are also available. The maximum load per dimmer module is 2*200 W or 1*400W.

Of course, you can change the icons and names on the switch screen.

If you want to customize your switch, send us the details and our graphic designer will create a project for you.

At the moment we are working on creating the app in which you can customize the switch panel by yourself. It will take a while, in the meantime send us an email: biuro@abiline.pl

Scenes are not available in BASIC series.

In order to buy the switches go to our online shop www.abiline.pl

Please read Assembly and Setting Instruction

Seria2000_PL_ver3.0